March weather forecastCloncurry, Australia
March
Weather in March
The first month of the autumn, March, is still a hot month in Cloncurry, Australia, with temperature in the range of an average high of 33.8°C (92.8°F) and an average low of 25°C (77°F).Temperature
The advent of March presents an average high-temperature of a still tropical 33.8°C (92.8°F), maintaining a close correlation with the preceding month. Throughout the month of March, Cloncurry reports a steady low-temperature average of 25°C (77°F).Heat index
March's heat index is evaluated at a torrid 36°C (96.8°F). Exercise extra preventive actions, heat cramps and heat exhaustion are plausible. Continuous activity could result in heatstroke.When assessing, remember that heat index measurements are for light winds and shaded spots. Heat index values may rise by up to 15 Fahrenheit (8 Celsius) degrees when exposed to direct sunlight.
Note: The heat index, also known as 'feels like' or 'felt air temperature', embodies the combination of air temperature and moisture content to illustrate perceived heat. The individual's impression of temperature can be affected by numerous factors such as metabolic variations, physical exertion, and attire. Always consider that direct sunlight exposure might heighten the heat's effects, pushing the heat index up by 15 Fahrenheit (8 Celsius) degrees. Heat index values are particularly relevant to children. Young children are generally more endangered than adults, as they usually less sweat. And also, due to larger skin surface relative to their small bodies and higher heat production as a result of their activity.
Normally, the human body cools itself through perspiration, which removes excessive heat by evaporating sweat. When the air contains significant moisture, the efficiency of the evaporation process decreases, preventing the body from cooling down effectively and creating a feeling of overheating. Elevated heat gain compared to the body's release capability poses risks of dehydration and potential overheating.
Humidity
In Cloncurry, Australia, the average relative humidity in March is 43%.Rainfall
In Cloncurry, in March, during 8.6 rainfall days, 43mm (1.69") of precipitation is typically accumulated. In Cloncurry, during the entire year, the rain falls for 62.1 days and collects up to 316mm (12.44") of precipitation.Daylight
In Cloncurry, the average length of the day in March is 12h and 13min.On the first day of the month, sunrise is at 6:35 am and sunset at 7:05 pm. On the last day of March, in Cloncurry, Australia, sunrise is at 6:44 am and sunset at 6:39 pm AEST.
Sunshine
The average sunshine in March in Cloncurry is 8.8h.UV index
In Cloncurry, the average daily maximum UV index in March is 7. A UV Index value of 6 to 7 symbolizes a high health hazard from exposure to the Sun's UV rays for average individuals.Note: The maximum daily UV index of 7 in March interprets into the following recommendations:
Prevent overexposure. Protection from the sun's harmful effects is needed. Seek shade and minimize exposure to direct Sun in a period between 10 a.m. and 4 p.m. when UV radiation is most intense; keep in mind that shade structures like parasols or canopies do not provide perfect sun protection. Always opt for UVA and UVB-resistant sunglasses on radiant days.
Published by: Weather Atlas | About Us
Data Sources | Weather Forecasting & Climate
Frequently asked questions
Average temperature in March
Cloncurry, Australia
- Average high temperature in March: 33.8°C
The warmest month (with the highest average high temperature) is December (36.7°C).
The month with the lowest average high temperature is June (24.3°C).
- Average low temperature in March: 25°C
The month with the highest average low temperature is December (28°C).
The coldest month (with the lowest average low temperature) is July (13.8°C).
Average pressure in March
Cloncurry, Australia
- Average pressure in March: 1009.6mbar
The month with the highest atmospheric pressure is July (1018.5mbar).
The month with the lowest atmospheric pressure is January (1006.1mbar).
Average wind speed in March
Cloncurry, Australia
- Average wind speed in March: 17km/h
The windiest month (with the highest average wind speed) is June (19.3km/h).
The calmest month (with the lowest average wind speed) is February (15.9km/h).
Average humidity in March
Cloncurry, Australia
- Average humidity in March: 43%
The month with the highest relative humidity is January (46%).
The month with the lowest relative humidity is October (23%).
Average rainfall in March
Cloncurry, Australia
- Average rainfall in March: 43mm
The wettest month (with the highest rainfall) is January (102mm).
The driest month (with the least rainfall) is August (1mm).
Average rainfall days in March
Cloncurry, Australia
- Average rainfall days in March: 8.6 days
The month with the highest number of rainy days is January (13.2 days).
The month with the least rainy days is August (0.8 days).
Average daylight in March /
Average sunshine in March
Cloncurry, Australia
- Average daylight in March: 12h and 12min
The month with the longest days is December (Average daylight: 13h and 24min).
The month with the shortest days is June (Average daylight: 10h and 54min).
- Average sunshine in March: 8h and 48min
The month with the most sunshine is November (Average sunshine: 11h and 48min).
The month with the least sunshine is January (Average sunshine: 8h and 18min).
Average sunshine days in March
Cloncurry, Australia
- Average sunshine days in March: 21.8 days
The month with the most sunshine days is August (30.1 days).
The month with the least sunshine days is January (16.8 days).
Average UV index in March
Cloncurry, Australia
- Average UV index in March: 7
The months with the highest UV index are February, October, November and December (UV index 8).
The month with the lowest UV index is June (UV index 5).
Average cloud cover in March
Cloncurry, Australia
- Average cloud cover in March: 25
The month with the most cloud cover is January (Cloud cover 32).
The month with the least cloud cover is August (Cloud cover 4).
Average visibility in March
Cloncurry, Australia
- Average visibility in March: 10km
The months with the highest visibility are January, February, March, April, May, June, July, August, September, October, November and December (10km).
The months with the lowest visibility are January, February, March, April, May, June, July, August, September, October, November and December (10km).





